卵形槽模具因为其形状与加工原料的特点,工人操作起来会非常的方便,而且也可以顺利进行使用加工出合格的卵形槽预制件,通常使用模具进行加工的话大致是分成了四个生产环节。一需要提前将卵形槽模具进行组装拼接,因为钢模具的话在仓库中存放的时候是被拆分成一片一片的结构,如果需要顺利进行使用的话,就必须将这些模具进行组装了,使用螺栓将每篇模具拼接在一起,电动扳手可以将这些螺栓很好的固定在模具上。二在模具里面涂刷上脱模剂,包括一些拼接的位置与模具焊接的位置,这样可以增加模具内里的润滑效果,方便泥浆在凝固成型后进行脱模处理。钢制闸门 钢坝 保定轻钢别墅 保定平面设计培训 保定室内设计培训 保定办公家具 保定空调维修 三搅拌好的泥浆需要慢慢的注入到卵形槽模具里面,在不断的震动过程中可以保证气泡被慢慢的排出干净,这样生产出来的卵形槽能够保证成型后的光滑效果,不会有凹凸不平的问题。四必须在泥浆完全凝固后再去将模具拆开,如果生产出来的卵形槽表面有坑坑洼洼的问题,则不能够正常施工使用,需要重新制作。
Because of its shape and the characteristics of processing raw materials, the oval groove mold will be very convenient for workers to operate, and can also be used smoothly to process qualified oval groove preforms. Generally, if the mold is used for processing, it is roughly divided into four production links. First, the oval groove molds need to be assembled and spliced in advance, because the steel molds are split into a piece by piece structure when they are stored in the warehouse. If they need to be used smoothly, these molds must be assembled. Each mold is spliced together with bolts, and these bolts can be well fixed on the mold with an electric wrench. Second, apply release agent in the mold, including some splicing positions and mold welding positions, which can increase the lubrication effect in the mold and facilitate the demoulding treatment of the slurry after solidification. III. The mixed mud needs to be slowly injected into the oval groove mold. In the process of continuous vibration, it can ensure that the bubbles are slowly discharged. In this way, the oval groove produced can ensure the smooth effect after forming and will not have the problem of unevenness. IV. the mold must be disassembled after the mud is completely solidified. If there are potholes on the surface of the produced oval groove, it cannot be used for normal construction and needs to be made again.